Category Archives: :: Product ::

  • -

Premium Motor Oil

Category : :: Product ::

NILE PREMIUM MOTOR OIL
NILE PREMIUM MOTOR OIL is a quality multi grade oil for use in gasoline and diesel engines. It is blended with highly refined mineral base oil and additives to meet and exceed the lubrication requirements of naturally aspirated and turbo charged engines. It provides excellent protection and lubrication throughout the year.
TYPICAL PROPERTIES
SAE GRADE 15W-40 20W-50
Appearance C&B C&B
Density at 15 °C gm/ml 0.880 0.885
Viscosity at 100 °C, cst 15.5 18.5
Viscosity at 40 °C, cst 122.9 172
Viscosity Index 130 120
Flash point , COC °C 212 220
Pour point , °C -27 -24
TBN, mg KOH/gm 6.0 6.0
Foaming sequence 0/0, 10/0, 0/0 0/0,10/0,0/0
Product Code 1070 1071
APPLICATIONS
  • Recommended for the lubrication of engines (both normally aspirated and turbo charged), transmission, final drives, hydraulic and wet brake systems of tractors and other farming equipments.
BENEFITS
  • Multi application additive package enables use in engines, transmission, final drives and hydraulic system.
  • Protection against acid, varnish, carbon deposits, formation of gums, and reduces oil thickening.
  • Multi-viscosity characteristic ensure rapid oil circulation on start-up, preventing wear
  • Special friction modifier component that allows smooth action of the wet brakes and power take-off clutches, minimizing chatter, stick slip and squawk.
PERFORMANCE
API CF/SF, API GL-5
US MILITARY MIL-L-21O5
CAT TO4
KOMATSU KES 07.868.1
ALLISON C4 OFFROAD
ACEA E3
FORD UTTO

 


  • -

Platinum Super Plus Motor Oil

Category : :: Product ::

NILE PLATINUM SUPER PLUS Multi grade oil
NILE PLATINUM SUPER PLUS Multi grade oil is formulated with highly refined base oils and advanced additive packages. It meets the required performance standards of latest gasoline engines, turbo charged and naturally aspirated.
TYPICAL PROPERTIES
SAE GRADE 20W-50
Appearance C&B
Density at 15 °C gm/ml 0.889
Viscosity at 40 °C, cst 181.6
Viscosity at 100 °C, cst 19.2
Viscosity Index 120
Flash point , COC °C 230
Pour point , °C -24
TBN, mg KOH/gm 7.6
Foaming sequence 10/0, 20/0, 10/0
Product Code 1050
APPLICATIONS
  • Recommended for all modern vehicles including high performance, turbocharged, multi valve, direct injection gasoline and diesel engines of passenger cars.
  • The SAE 20W50 viscosity grade exceed the requirements of most modern European, North American and Japanese passenger cars.
  • It can also be used for engines where API series category SJ and earlier categories are recommended.
BENEFITS
  • Excellent engine protection.
  • Eliminates seasonal oil changes.
  • Maintain the high order of engine cleanliness.
  • Improved control of deposit formation, Excellent shear stability.
PERFORMANCE
API SL/CF
ACEA A2-96, B2-96
US MILITARY L-46152E

 


  • -

NILE SUPER COOL ORGANIC

Category : :: Product ::

NILE SUPER COOL ORGANIC
NILE SUPER COOL ORGANIC is the high quality concentrated ethylene glycol based engine coolant/antifreeze. It based on latest organic technology additive system gives long time protection and suited for year round use in cars and light and heavy duty trucks, specially made for cooling system components. Available in concentrate form. Its 50% concentration in deionized water is recommended for all weather protection in form of antiboling and antifreezing property.
TYPICAL PROPERTIES
Grade 100 % 50 % 40 %
Appearance Greenr Green Green
Density,at 20°C, gr/ml. 1.125 1.060 1.035
BoilingPoint at (50%) °C 165 129 126
Water content, % wt (max) 3.5 50% 60%
pH, 50% solution in water (max) 9 8.7 8.6
Product Code 7020 7021 7022
APPLICATIONS
  • NILE SUPER COOL Is recommended for use as a radiator coolant / antifreeze for all kind of passenger and heavy vehicle.
  • It can use in 40 % – 70 % concentration as per freezing and boiling point requirements. It can be used in industrial generators and hearth moving equipments.
BENEFITS
  • Protect the cooling system against freezing in winter and boil-over in summers.
  • Chemical inhibitors minimizes corrosion of copper, solder, brass, steel, cast, cast iron and aluminum metals which are commonly used in coolant systems.
  • Its special rubber anti swelling property protects hose, seal, gasket and engine parts.
PERFORMANCE

Concentration in water

Freezing Point (°C) Boiling Point (°C)
40% -24 126
50% -37 129
60% -52 132
70% -64 136

  • -

NILE HEAVY DUTY BRAKE FLUID

Category : :: Product ::

NILE HEAVY DUTY BRAKE FLUID
NILE HEAVY DUTY BRAKE FLUID, DOT-3 and DOT-4 are high quality non mineral fluids based on glycol ethers and other chemicals. Its synthetic formula is compatible to all type of rubber parts. Its high temperature formula gives temperature evaporation and gives maximum result. It is suitable to all kind of brake system.
TYPICAL PROPERTIES
DOT 3 & 4
FMVSS 116 ( DOT 3 )
DIN/ISO 4925
SAE J1703 ( DOT 3 )
APPLICATIONS
DOT 3

  • Hydraulic brake system (disc and drum brakes) of any commercial vehicles, passenger cars and motorcycles requiring a brake fluid meeting FMVSS DOT 3 or SAE J 1703 standards.
  • Follow vehicle manufacture’s recommendation when adding brake fluid.
  • Clutch systems of any motor vehicles requiring such quality brake fluids .

DOT 4

  • Hydraulic brake fluid systems (disk, drum and anti-locking brake systems) in cars, motorcycles and commercial vehicles where DOT 4 type of brake fluid is specified.
BENEFITS
  • High equilibrium reflux boiling point.
  • Good lubricity.
  • Safe for brake system material.
  • Very good seal compatibility.
  • Protects against rusting and corrosion.
PERFORMANCE
DOT 3 & 4
FMVSS 116 ( DOT 3 )
DIN/ISO 4925
SAE J1703 ( DOT 3 )

  • -

NILE HT GREASE

Category : :: Product ::

NILE HT GREASE
NILE HT GREASE is formulated with an inorganic thickener and highly refined base oil. It contains EP agent and rust inhibitors. It possesses resistance to water washing and provides effective protection against rust and corrosion for both ferrous and non-ferrous metals.
TYPICAL PROPERTIES
NLGI 2
Thickener In organic
Appearance Light Brown
Drop Point, , °C Infusible
Worked Penetration at 25, °C, MM 265 – 295
Operating Range , °C -20 to 200
Base Oil Viscosity at 100, °C cSt 30.0
Product Code 6040
APPLICATIONS
  • HT GREASE is recommended for applications where continuous high temperatures or intermittent very high temperatures are experienced. The maximum usable temperature for Hi-Temp Grease for extended service is 200 ºC.
  • It is recommended for application such as furnace door bearings and kiln car wheel bearings and for general industrial lubrication where non-melting grease is required.
  • It can also be used in ambient temperature applications such as roll neck bearings where high resistance to water washing is needed.
BENEFITS
  • Thickener does not melt, extremely high dropping point.
  • Will not soften and leak from bearings exposed to high temperature.
  • Resistance to water washing, steam and humid conditions.
  • Consistency maintained despite cycling temperature conditions.
  • Good pumpability.
  • Molybdenum enhanced EP characteristics.
  • High pressure loading capacity.

  • -

NILE GENERAL PURPOSE GREASE

Category : :: Product ::

NILE GENERAL PURPOSE GREASE
NILE GENERAL PURPOSE GREASE is manufactured from selected quality base oils, calcium soap and additives to provide excellent water resistance properties and good corrosion and rest protection.
TYPICAL PROPERTIES
NLGI 2 3
Soap Type Calcium Calcium
Appearance Light Brown Light Brown
Drop Point, , °C 102 98
Worked Penetration at 25, °C, MM 265 – 295 220 – 250
Operating Range , °C -10 to 80 -10 to 80
Base Oil Viscosity at 100, °C cSt 15.0 17.0
Product Code 6030 6031
APPLICATIONS
  • It is highly recommended for application in water environments such as slips ways and water pump bearings.
  • The recommended temperature range of this product is 60°C in continuous service and 80°C for short exposure.
BENEFITS
  • Excellent water resistance properties.
  • Good rust and corrosion protection.
  • Excellent film strength.

  • -

MULTI-PURPOSE GREASE

Category : :: Product ::

MULTI-PURPOSE GREASE
MULTI-PURPOSE GREASE is formulater with quality base oils, lithium hydroxide, 12 hydroxy stearic acid which contains a wide range of moderate service application. It is recommended for automotive and industrial applications operating in moderate temperatures and load. In general it is intended to lubricate chassis components, wheel bearings, clutch bearings, universal joints and ball joints.
TYPICAL PROPERTIES
NLGI 2 3
Soap Type Lithium Lithium
Appearance Dark Brown Dark Brown
Drop Point, , °C 190 190
Worked Penetration at 25, °C, MM 265 – 295 220 – 250
Operating Range , °C -20 to 130 -20 to 130
Base Oil Viscosity at 100, °C cSt 15.0 17.0
Copper Strip Corrosion 1 A 1 A
Product Code 6020 6021
APPLICATIONS
  • MP GREASE, as a multi purpose grease, is suitable for applications found in industrial and automotive applications, such as electric motor bearings, fan bearings, pump bearings, wheel bearings, steel joints and other plain anti-friction applications.
  • It is recommended for use where operating temperature is up to 130°C.
BENEFITS
  • Multi-purpose grease for a wide range of applications.
  • Excellent protection against rust and corrosion.
  • Sticks to bearing surfaces to give long lasting protection.
  • High resistance to water wash-out.

  • -

EP GREASE

Category : :: Product ::

EP GREASE
EP GREASE is a premium, Lithium Complex industrial and automotive lubricating grease for plain and anti-friction bearings. Available in NLGI grades 2 and 3, EP GREASE is shear and oxidation stable, provides protection against rust and oxidation while resisting softening at higher temperatures.
TYPICAL PROPERTIES
NLGI 2 3
Soap Type Lithium Lithium
Appearance Dark Brown Dark Brown
Drop Point, , °C 205 212
Worked Penetration at 25, °C, MM 265 – 295 220 – 250
Operating Range , °C -10 to 160 -10 to 160
Base Oil Viscosity at 100, °C cSt 15.0 17.0
Copper Strip Corrosion 1 A 1 A
Product Code 6010 6011
APPLICATIONS
  • EP GREASE is suitable for the general machine lubrication of plain and rolling bearings including electric motors, fans, pumps, etc.
  • It is recommended as a multi purpose grease in manly industrial and automotive applications up to 160 °C
BENEFITS
  • Longer life at higher temperatures.
  • Shear and oxidation stable.
  • Excellent wear protection.
  • Resists softening at elevated temperatures.
  • Wide application range.

  • -

NILE TRANSMISSION GEAR OIL

Category : :: Product ::

NILE TRANSMISSION GEAR OIL
NILE TRANSMISSION GEAR OIL is formulated with quality base oils and selected additive package. They are primarily for use in automotive transmissions, drive axils, worm drives, reduction gears which do not require extreme pressure hypoid type lubricants.
TYPICAL PROPERTIES
SAE Grade 90 140
Appearance C & B C & B
Density,at 15 °C, gr/ml. 0.889 0.905
Viscosity at 100 °C, cSt 18.7 30.4
Viscosity at 40 °C, cSt 220 460
Viscosity Index 95 95
Flash Point, COC °C 230 240
Pour Point, °C -9 -6
Product Code 4060 4061
APPLICATIONS
  • Recommended for summer use where a heavier oil is desired such as in truck and heavy duty transmission and in rear axles of final drives where the manufacturer specifying API GL-1 grade of oil
BENEFITS
  • Good film strength in applications for which non EP oils provide adequate protection.
  • Resistant to thickening in long term high temperature services.
  • Good protection against rusting and corrosion.
  • Highly resistance to foaming.
PERFORMANCE
API GL-1

  • -

NILE SUPER GEAR OIL

Category : :: Product ::

NILE SUPER GEAR OIL
NILE SUPER GEAR OIL is designed and manufactured from premium quality base oils and selected additive packages to provide a high level protection for hypoid gears, in general, where API GL-4 performance is required. These oils are thermally stable and provides extra pressure properties specially required for hypoid gears. It provides protection against foaming of oil, wear and rusting of gears.
TYPICAL PROPERTIES
SAE Grade 90 140 80W-90 85W-140
Appearance C & B C & B C & B C & B
Density,at 15 °C, gr/ml. 0.898 0.905 0.892 0.905
Viscosity at 100 °C, cSt 17.3 29.0 12.1 28.6
Viscosity at 40 °C, cSt 195 429 112 392
Viscosity Index 95 95 95 100
Flash Point, COC °C 220 230 220 230
Pour Point, °C -9 -9 -21 -18
Product Code 4050 4051 4052 4053
APPLICATIONS
  • Recommended for the lubrication of manual transmissions and transaxles, hypoid, spur, bevel, helical, spiral bevel and worm gears in differentials, manual transmissions, final drives, transfer cases and steering mechanisms where API GL-4 specification is recommended.
  • Suitable for use in gear boxes, final-drives and power take-offs on farm and earth moving machinery
BENEFITS
  • High load carrying ability.
  • Protects against gear tooth wear and scoring.
  • Superior thermal stability.
  • Resists oxidation due to high temperature.
  • Non-corrosive to steel and towards sensitive copper alloy.
PERFORMANCE
API GL-4
MIL-L 2105

Select Your Language


Our Product

oil-drop GASOLINE ENGINE OIL
oil-drop DIESEL ENGINE OIL
oil-drop HYDRAULIC OIL
oil-drop AUTOMATIC TRANSMISSION OIL
oil-drop MANNUAL TRANSMISSION OIL
oil-drop GREASES
oil-drop SPECIALTY PRODUCTS